Calibration of temperature sensor for Papouch devices in accredited laboratory. Calibration is provided in three points of temperature range.
Once ordered, certificate for one sensor with one serial number will be issued. The service is calibration certification only, NO firmware modifications. Inaccuracy of readouts shall be corrected on costumer's side.
Calibration should be renewed once a year for combined temperature and humidity sensors and once every two years for temperature sensors or according to your legislative requirements.
Calibration will be provided in three points of temperature range. For higher accuracy, it is recommended to specify the measured range according to use of sensor (e.g. room temperature ranges from 10 °C to 35 °C, outside temperature would be -20°C to 45°C etc.). If this range is NOT specified by customer upon ordering the service, calibration points will be -30°C, -10°C, 20 °C, 50 °C a 75 °C.
Standard delivery term for calibrated sensors is 20 days. It is possible to order an express service for an additional fee.
Note: In case of calibration of Pt100 sensors for PAPAGO 2PT , PAPAGO must also be calibrated, the calibration protocol will then include both the sensor and the PAPAGO 2PT unit.
To calibrate the sensor itself, the following calibrations must be ordered: