DA2ETH: DA converter with two voltage or current outputs with Ethernet

DA2ETH is a universal converter with analog output used for control and regulation. Two independent analog outputs can be either voltage or current. Available ranges are: 0 - 10 V, 0 - 5 V, ±10 V, ±5 ...more information
This product includes:
Device from the set above
248,9 EUR excl. VAT 301,2 EUR incl. VAT
More than 5 units in stock
Personally in Prague:Tuesday 2.4.With a delivery company:at the latest Thursday 4.4.
Order CodeDA2ETH_1Warranty36 monthsCustoms Code85176200Weight176 gCountry of originCZMakerPapouch.com

DA2ETH is a universal converter with analog output used for control and regulation. Two independent analog outputs can be either voltage or current. Available ranges are: 0 - 10 V, 0 - 5 V, ±10 V, ±5 V, 4 - 20 mA, 0 - 20 mA, 0 - 24 mA. Ethernet communication: Modbus, SNMP, XML, HTTP GET, TCP/UDP (Spinel).

DA2 analog outputs can be used for process regulation and automation or controlling analog inputs (e.g.  electronic thermostats, electronic valves, speed control, dimming of lighting,...).

Princip funkce

Device function principal

Features

  • Two analog outputs (independent settings for current or voltage). Available ranges:
    0 – 10 V, 0 – 5 V, ±10 V, ±5 V, 4 – 20 mA, 0 – 20 mA, 0 – 24 mA
  • Each output galvanically isolated.
  • Output range divided to 10 000 divisions.
  • Active current outputs.
  • Default output value is configurable. An interval can be set after which the output automatically reverts to the default value.
  • 16 bit D/A converter
  • Ethernet communication using Modbus TCP (server or client), SNMP, HTTP GET,
    TCP/UDP (Spinel).
  • Wide power voltage range (8 to 30 V).

Output control options

All settings mentioned below is descriped in detail in the datasheet that can be downloaded in PDF format.

1) Manual: WEB interface

Manual input using the WEB interface.

Manual input using WEB interface

2) Automatic: Modbus TCP (client mode)

Automated reading from a remote device using ModBus TCP protocol (client mode). DA2 automatically reads ModBus registers from a remote device and sets the output parameters based on that.

Modbus TCP (client)

3) Automatic: AD4ETH input mirroring

Extend analog signals over a great distance using Ethernet (Internet/Ethernet) working in tandem with AD4ETH module. After the settings are stored, DA2ETH starts to read values from AD4ETH periodically and set those values on its outputs, thus states of two analog signals can be transmited this way.

Input mirroring

4) Automatic: Modbus TCP (server mode)

Changing outputs using Modbus TCP (server mode). A remote client can set output values by writing them into ModBus register in DA2 unit.

5) Automatic: XML

Automated reading from a remote server using XML. Remote server has the data in XML format, DA2 unit reads them periodically and sets output values

XML

6) Automatic: HTTP GET

Set output values using HTTP GET. Remote server calls script in DA2 unit and sends the output values as parameters.

HTTP GET

7) Automatic: SNMP

Using SNMP (Simple Network Management Protocol). A standardized protocol used for network management. DA2 acts as an SNMP agent.

8) Automatic: TCP/UDP

Using TCP communication with Spinel protocol. Available modes are TCP server, TCP client, UDP. This communication option cannot be combined with other options.

Data reading in XML format

All values from the DA2ETH converter can also be obtained in XML format. That is one of the easiest ways to automatically read data from any converter. Example of DA2ETH XML:

<root>
	<out id="1" status="0" range="2" value="5.00" divs="5000" />
	<out id="2" status="0" range="4" value="7.62" divs="2450" />
	<status location="U Papoucha" />
</root>

Block diagram

The device is divided into three completely galvanically isolated sections:

  1. Power, processor unit and Ethernet,
  2. output 1,
  3. output 2.
Blokové zapojení

Block diagram DA2ETH

Dueto the galvanic isolation, the analog converter can be connected to other systems without damaging the equipment or adversely affecting the systems beacuse of the connection of different voltage potentials via a common ground conductor.

WEBVyrobcePapouch.com

da2eth.pdfDA2ETH datasheet

Complete documentation for DA2ETH converter.

File size: 1,34 MB

Date: 29-06-2020

Download

da2-spinel.pdfSpinel protocol

Complete documentation of Spinel protocol in analog DA2 converters (in Czech).

File size: 614 kB

Date: 29-06-2020

Download

ethernet-configurator.zipethernetconfigurator.zip

Universal configuration software for Papouch Ethernet devices. It allows you to set-up your device even from another network range. It can set basic network parameters even for a device in a different subnet than your PC has. Ethernet Configurator homepage

File size: 534 kB

Date: 12-08-2013

Download

DescriptionDownloadAccessoriesAlternatives
We value your privacy
This website stores cookies that help it to work properly. By using our services, you agree to their use.
Allow everythingDetailed settings